Cloud Backup extension installation does not finish

What issue or error are you experiencing?

A just installed Local when iniciated installation shows the circle evolving. When the circle is completed it stops there without finishing the installation

What steps can be taken to replicate the issue? Feel free to include screenshots, videos, etc

System Details

Local Logs

Attach your Local Logs here (Help Doc - Retrieving Local’s Log)
local-lightning-verbose.log (71.1 KB)

Security Reminder
Local does a pretty good job of scrubbing private info from the logs and the errors it produces, however there’s always the possibility that something private can come through. Because these are public forums, always review the screenshots you are sharing to make sure there isn’t private info like passwords being displayed.

Hi @Gponchiardi

I see this error in the log:

{"code":"ENOSPC","errno":-4055,"level":"error","message":"ENOSPC: no space left on device, write","stack":"Error: ENOSPC: no space left on device, write","syscall":"write","thread":"main","timestamp":"2024-01-20T16:40:14.104Z"}

Can you check if there is space on the drive?

1 Like

Thank you for the quick assitance. I had a 2GB RAMDISK for the temp files. I elliminated this RAMDISK, After that I deinstalled Local and Installed again. Now it is local that does not start. I reviewed the logs and found error apparently pointing to Registry. The disk has 66 GB remaining and the installation asks for 1.8. I enclose both logs. Thank you again for the help.
local-lightning-verbose.log (84.6 KB)
local-lightning.log (21.5 KB)

Hi @Gponchiardi

If you change your Router Mode to Localhost are you able to proceed?

Preferences>Advanced>Router Mode>Localhost

Dear Nick: I tried the change of Router mode but it did not work. However, I had not changed adequately to the standard windows Temp and TMP assignments. After correcting that assignment the installation worked perfectly. Once again many thanks for the quick support for a problem caused by myself.

1 Like

Glad to hear it @Gponchiardi! Thank you for letting us know.